ANGLE POST SHELVING

Standard Colour Off White alternative Bronze
Also available in Gold Passivate / Off White. A wide range of special colours are available on request

Standard Modules 900mm, 600mm

Standard Heights 1.8m, 2.1m, 2.4m, 3.0m

Standard Depths 300mm, 400mm, 450mm, 600mm, 750mm, 900mm

Material Specification

Uprights
40mm x 400mm x 2mm slotted equal angle NZCC 4D pitch 50mm
Shelves 0.8mm standard duty NZCC 8D
(Option - ribs increase weight capacities)
Anchor Plates
0.875m NZCC 8D
Clips No. 3 2mm (4 per shelf) NZCC 4D
Footings 1.6mm (Optional) NZCC 8D
Fastenings M6mm x 12mm and 6mm x 20mm dome head square shank
Self locking high tensile coach bolts c/w flange nuts 8.8 grade

Structural - Anchor Plate Guidelines

It a prerequisite that at all times both top and bottom of the upright are securely fixed either to a shelf or to the floor.

1. Up to 1.8m high - not exceeding 500 kgs per bay
- not exceeding 600mm shelf depth
Two anchor plated levels top, plus one up from the ground which is not above 600mm.
Otherwise three anchor plated levels.

2. 2.1m to 2.4m high - not exceeding 1000 kgs per bay
Three anchor plated levels (top, middle plus one up from the ground which is not above 450mm. Otherwise four anchor plated levels.

3. 3.0m to 3.6m high - not exceeding 1000 kgs per bay
Four anchor plated levels - evenly spaced with the bottom level not above 450mm from the ground.

Anchor plates should be fitted through the depth of the shelving at every second bay except in the case of shelves over 600mm deep then they should be fitted at every bay.

Anchor plating will enable a shelving unit to retain its shape. To prevent toppling, units should not exceed the following height to base ratios without additional external bracing. (Top ties and/or dynabolting footings).

Units up to 2.4m 4 : 1 (height is not more than 4 x base)

Above this height, additional external bracing is required.
Shelf Weight Capacities Maximum U.D.L.
900mm x 300mm (M3ND) 170 kgs
900mm x 400mm (M4ND) 170 kgs
900mm x 450mm (M450ND) 170 kgs
900mm x 600mm (M6ND) 170 kgs
900mm x 600mm (M6HD 1 Rib) 190 kgs
900mm x 750mm (M750ND) 160 kgs
900mm x 750mm (M750HD 1 Rib) 180 kgs
900mm x 900mm (M9ND) 150 kgs
900mm x 900mm (M9HD 2 Rib) 180 kgs

The above loadings are based on shelves supported on four standard, number 3 clips. Loadings can be increased by 20% only if shelves are bolted on all four corners (i.e: four posts per bay).

All shelves above are available in 600mm module.

Fastening Requirements - Box Bays

A) 4 Anchor Plated Levels
Starter Bay 4 posts 6mm x 12mm = 80
6mm x 20mm = 16
Middle Bay 4 posts 6mm x 12mm = 64
6mm x 20mm = 32
End Bay 2 posts 6mm x 12mm = 48

B) 3 Anchor Plated Levels
Starter Bay 4 posts 6mm x 12mm = 60
6mm x 20mm = 12
Middle Bay 4 posts 6mm x 12mm = 48
6mm x 20mm = 24
End Bay 2 posts 6mm x 12mm = 36

C) 2 Anchor Plated Levels
Starter Bay 4 posts 6mm x 12mm = 40
6mm x 20mm = 8
Middle Bay 4 posts 6mm x 12mm = 32
6mm x 20mm = 16
End Bay 2 posts 6mm x 12mm = 24

If feet are required on each post, allow 1 x 6mm x 12mm per post.
If units are installed back to back, allow 3 x 6mm x 20mm / alternative bay to join.